Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack Kit

This 954mm/37.6'' long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and the Jeep Extreme Mounting System to mount the Slimline II Tray to your Jeep Gladiator JT. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions and all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Please see the fitment instructions in the INSTALL tab for further installation information. *Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.Note: This is not suitable for the Mojave Edition of the Jeep Gladiator.

KRJG016T - Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack Kit Consisting of: 1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount 1x FAJT003 - Jeep Gladiator JT (2019-Current) Foot Rail/Mini 1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 22.24kg (49.03lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 325mm (13") Shipping Weight: Weight: 31kg (68lbs)